13
Menu Operation
At this step, Set
preset 96 to confirm settings.
After preset 95 is called, it will exit OSD and below window pops up.
If, in the last step, Set preset 96 has not been conducted but preset 95 is called to exit menu, then
below window will pop up indicating that the setting has not been saved. Call preset 95 to get into
menu again and set until the final step and Set
preset 96 to save settings again.
[Note]
Even if the settings are not saved, the settings are valid before rebooting.
Exit, Track parameters saved.
Address
：
1, Pelco-D, 9600
Call 80# to begin tracking
Call 95# to set parameters
Save track parameters complete!
Call 95# again to exit setting
[Note]
Should be Set instead of Call preset 96. Then below window will pop up indicating
the settings are saved, Call preset 95 to exit the menu
