Meggitt 60-2 Operating Handbook Download Page 39 | Manualshive

Page: 39 / 62

background image

4-16

2nd Ed: Nov 01, 01

SYS 60-2 POH

Straight-in Localizer Approach and Tracking (Optional HSI)

1.

a. Tune navigation radio to LOC frequency.
b. Set course pointer to published inbound LOC course heading.
c. Press NAV mode switch. Autopilot will intercept, capture, and track the localizer.

2.

a. Once NAV mode is established, heading bug can be set to published missed approach heading.
b. At the middle marker, if a missed approach is declared, disconnect the autopilot and stabilize the
aircraft for the missed approach climb before engaging HDG mode.

NOTE: To establish a pilot selectable angle of intercept (dual mode intercept), set the course pointer to the
published inbound front course heading, and the heading bug to the desired heading to establish the selected
angle intercept or to the Radar Vector HDG. Press the HDG and NAV mode switches simultaneously.
Upon capture of course, the autopilot automatically cancels HDG mode and tracks the final approach
course. Heading bug can be set to missed approach heading after course capture.

Fig. 4-8

«
...
37
38
39
40
41
...
»

Summary of Contents for 60-2































































Reviews:

No comments

Related manuals for 60-2

Brand: Concertone Pages: 12

Brand: Cobolt Pages: 5

Brand: Globalmediapro Pages: 11

Brand: Hama Pages: 45

Brand: Johnson & Starley Pages: 2

Brand: Blaupunkt Pages: 97

Brand: Blaupunkt Pages: 112

Brand: RCA Pages: 18

Perfect Chair touchSONIC

Brand: Interactive Health Pages: 2

Brand: Garmin Pages: 20

Brand: Void Pages: 8

Brand: TECNICOMAR Pages: 38

Brand: Tronios Pages: 16

Brand: Aiwa Pages: 18

Bio-Logic Elite 7100

Brand: GARDEN MASTER Pages: 16

Brand: Crosley Pages: 13

Brand: Crosley Pages: 14

Brand: Bush Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands