background image

SVERKER 750/780

Relay Test Sets

The engineer’s toolbox for all single phase 
relay testing

Stand-alone functionality

Rugged and reliable for field use

Description

The SVERKER 750/780 Relay Test Set is the engineer's toolbox. 

The control panel features a logical layout, still SVERKER 650 

users will find it comfortably familiar and will be able to start work 

right away. 
The SVERKER 750/780 features many functions that make relay 

testing more efficient. For example, its powerful measurement 

section can display (in addition to time, voltage and current) Z, R, 

X, S, P, Q, phase angle and cos 

φ

. The voltmeter can also be used 

as a 2nd ammeter (when testing differential relays for example). All 

values are presented on a single easy-to-read display.
You can also test directional protective equipment efficiantly by 

means of  the built-in variable voltage source. In SVERKER 780 

this has a continuous phase shift function and adjustable frequency  

as well. Automatic reclosing devices can also be tested – just as 

easily.
Designed to comply with EU standards and other personal and 

operational safety standards, SVERKER 750/780 is also equipped 

with a serial port for communication with personal computers and 

the PC software SVERKER Win. Since the compact SVERKER 

weighs only 18 kg (39 lbs), it’s easy to move from site to site.
Two or more SVERKER units can also be synchronized, which 

allows the user to operate a basic 3-phase test set.

Application

Relay Testing

SVERKER 750/780 is intended primarily for secondary testing 

of  protective relay equipment. Virtually all types of single-phase 

protection can be tested. You can also test three-phase protection 

that can be tested one phase at a time, and also a number of  

protective relay systems that require phase shifting. Moreover, 

automatic reclosing devices can be tested.
SVERKER 780 can test voltage relays with a frequency range from 

15 Hz up tp 550 Hz.

Examples of what SVERKER can test

ANSI® No.

Overcurrent relays

50

Inverse time overcurrent relays

51

Undercurrent relays

37

Ground fault relays 

50N, 51N

Directional overcurrent relays

67

Directional ground fault relays

67N

Overvoltage relays

59

Undervoltage relays

27

Directional power relays

32

Power factor relays

55

Differential protection (differential circuits)

87

Distance protection equipment (phase by phase)

21

Negative sequence overcurrent relays

46

Motor overload protection

51/66

Automatic reclosing devices

79

Tripping relays

94

Voltage regulating relays
Underimpedance relays

21

Thermal relays

49

Time-delay relays
Frequency relays (SVERKER 780)

81

SVERKER 750/780

Relay Test Sets

Summary of Contents for SVERKER 750









Reviews: