NOTE
THE INSTRUMENT MUST ONLY BE USED BY SUITABLY TRAINED
AND COMPETENT PERSONS
Users of this equipment and/or their employers are reminded that Health
and Safety Legislation requires them to carry out valid risk assessments of all
electrical work so as to identify potential sources of electrical danger and risk
of electrical injury such as inadvertent short circuits . Where the assessments
show that the risk is significant then the use of fused test leads constructed
in accordance with the HSE guidance not GS38 ‘Electrical Test Equipment
for use by Electricians ‘ should be used .
This instrument is internally protected against electrical damage when used
for the purposes of testing low voltage electrical installations as defined
herein. If used in a manor other than those defined in this user guide the
protection capabilities could be impaired with potential risk to the operator
and the instrument.
Symbols used on the instrument are:
G
Caution: refer to accompanying notes
Maximum nominal system voltage of 600 V
c
Equipment complies with current EU directives
Equipment complies with ‘C tick’ requirements
Maximum 300 V a.c. CAT IV to earth
Instrument protected by 2 x F2A 600 V 50 kA fuses
This equipment should be recycled as electronic waste
12 Vdc charger socket
Instrument overview
Display layout
Test button (left)
lead null set
Function
button
Test lock
Result save
Bluetooth
®
transfer
Display
backlight
Secondary
functions
Primary
functions
Test button (right)
Lead null set
UP selector
Test lock
Down selector
Touch
voltage
limit
Analogue arc
Function
indicators
Battery status
NiMH or Alkaline
Secondary display
Primary results
d Phase
Rotation
All manuals and user guides at all-guides.com
