G
Safety Information
■
DO NOT USE the test leads if the internal white insulation layer is exposed.
■
DO NOT USE the test leads above maximum ratings of CAT Environment or
voltage and current that are indicated on the probe and probe tip guard.
■
Do not apply a current with a frequency that is higher than the frequency
response range specified in the Electrical Specifications section.
■
Do not apply or remove the clamp or test leads on or around uninsulated
hazardous live conductors where a potential to cause electric shock, electrical
burns or arc flash exists.
G
CAUTION
Disconnect the test leads from the test points before changing the position of the
function rotary switch.
Never connect a source of voltage with the function rotary switch in Ω,
and
position.
Do not expose the meter to extremes of temperature or high humidity.
DCM1500S User Guide
5