9
MIN MAX
The MIN MAX function enables the user to display both a minimum
and a maximum measured reading. To activate, first select a function
and make a measurement. Press the MIN MAX button to store the
maximum reading. Should the value increase then the new value will
be stored. Pressing the MIN MAX button once more will switch the
instrument display to minimum reading.
Pressing the HOLD button while in MIN MAX mode will stop the
AVO410 updating the maximum and minimum displayed reading.
Holding down the MIN MAX button for >1 sec. will switch the
function off.
HOLD
Press the HOLD button to freeze the reading on the display. The MIN
MAX function is unavailable when the Hold is active.
RS-232
With an optional USB adapter and software the AVO410 can be
utilised with a computer to provide a virtual multimeter mode.
RANGE
When any of the individual functions are first selected the unit will
be in the auto ranging mode.
Each successive press of the range button will enable the operator to
manually choose a required range.
AUTO POWER OFF / DISABLE
If the meter is idle for more than 10 minutes, the meter automatically
turns the display off. During this off time the last reading on the
meter is stored. The AVO410 can be restored by pressing any button.
To disable the power off function simultaneously hold down the
MIN MAX, RS232 and Range buttons and switch instrument to
required function.
Summary of Contents for AVO410
Page 19: ...19 Fonctions 1 2 3 4 5 6...
