background image

www.megger.com

17

Battery and Fuse replacement (PAT120)

Battery type: 8 x 1.5 V Alkaline LR6 (AA) or NiMH HR6 rechargeable
Battery condition is shown by the following display symbols:

100%

Full

75%

50%

25%

<25%

Exhausted (Flashing)

For battery replacement:

 

a) Remove old cells and refit new batteries following correct polarity as marked on  

 

the battery holder. 

 

Either:   8 x 1.5 V AA / LR6 Alkaline

 

 

8 x 1.2 V AA / LR6 NiMH

 

c) Replace the battery cover.

Warning:

 Incorrect battery cell polarity can cause electrolyte leakage, resulting in damage to 

the instrument.

Warning:

 Do not mix battery technologies 

Warning:

 Do not use batteries with different charge state

Battery Disposal

The crossed out wheeled bin symbol placed on the batteries is a reminder not to dispose of 
them with general waste at the end of their life.

This product contains the following batteries: 
 

8 x AA Alkaline (LR6) 1.5V primary cells

They are located in the battery compartment on the rear of the instrument
They can be safely removed by ensuring all test leads have been disconnected from the 
instrument prior to removing the battery cover with a suitable screwdriver.
 
Spent PAT100 batteries are classified as Portable Batteries and should be disposed of in the 
UK in accordance with Local Authority requirements
 
For disposal of batteries in other parts of the EU contact your local Megger company or 
distributor.

Megger is registered in the UK as a producer of batteries.
The Registration number is BPRN00142

For Further information see www.megger.com

To replace batteries or fuse:  
 

Switch off the instrument. 

 

Disconnect the instrument from all electrical circuits. 

Battery

 

replacement

  

 

 

Remove the battery cover from the base by using a cross head screwdriver to un 

 

screw the battery cover fixing screw.

  

Spent Alkaline and NiMH batteries are 
classified as portable batteries and should 
be disposed of in the UK in accordance with 
Local Authority requirements. For disposal of 
batteries in other parts of the EU contact your 
local distributor.

Megger is registered in the UK as a producer of 
batteries.
The Registration number is BPRN 00142

Summary of Contents for 1003-062

























Reviews: