This document information is the intellectual property of Megawin Technology Co., Ltd.
6
Megawin Technology Co., Ltd. 2014 All right reserved.
MEGAWIN
MAKE YOU WIN
8051 OCD ICE
User Manual, v3.00
3 Software Setup
This section tell the user how to do software setup before using the OCD ICE.
3.1 Install the USB Device Driver for the ICE Adapter
The user just needs to plug the ICE adapter into any USB port in a PC. There is no need to install any device
driver for the ICE adapter.
3.2 Install the Megawin 8051 Database in the Keil 8051 IDE Software
Activate the
“Setup.exe”
in the folder
[Database Installer]
to open the
Database Installer Application Program
to
install the Megawin Database into the Keil 8051 IDE software. Of course, you should have installed the Keil 8051
IDE software, either
μVision2 or μVision3, in your PC previously.
After opening the
Database Installer
, please follow the steps shown in the following GUI figure.
Step1) Click the
Browse
button to specify where the Keil software has been installed.
(Normally, when you install the Keil 8051 IDE software, the default install-path is "C:\KEIL".)
Step2) Click the
Install
button to start installing the Megawin Database into the Keil software.
GUI of the Database Installer