9. CHARGING YOUR SCOOTER
Step 1: Ensure that the charging port is clean and dry.
Step 2: Plug the charger into the power socket, then connect the cable
with the power supply (100V
～
240V; 50,60Hz), make sure the
light on the charger is lit GREEN.
Step 3: Male DC connector plug into the charging port ofthe scooter. The
indicator light on the charger should change to RED, indicating
that your scooter is now, being charged. When the RED indicator
light on your charger turns to GREEN then your scooter is fully
charged. A full charge typically occurs within 5 hours.
Step 4: Please unplug the charger from your scooter and from the power
outlet.
12
IMPORTANT NOTES ABOUT CHARGING
NOTE
Only the indicator light on the charger will tell you the status of the
battery during charging.
If the green light on your charger does not turn RED when you plug it
tinto your scooter, it could mean you have to check the cables to
ensure you have a proper connection; or that your scooter is already
fully chaged. Push and hold your power button next to the charging
port to check the status of your battery in the display.
• Do not overcharge, as this will affect the life of the battery.
• The best charging temperatures are between 0°~40°. Extreme cold
and extreme heat will prevent your battery from charging fully.
• Make sure to unplug your charger before standing on or operating
you scooter, as this can be very dangerous.
• Use only the scooter charger that you received in your box.
