Megatron UP-PN-II, User Manual

Page: 21 / 36

21 UP-PN-
II
v0.8
Mnemo Hex Control codes
Basic 9Pins
HT 09 Tabulation x x
LF 0A Line feed x x
FF 0C Page feed x x
CR 0D
Carriage return x x
SO 0E
Double width x x
DC4 14 Normal width x x
ESC "!" 1B 21 Master mode x
ESC "$" 1B 24 Horizontal position: nL nH
x
ESC "'" 1B 27 Graphic Printing
x
ESC ")" 1B 29 Advance of n lines of characters x x
ESC "*" 1B 2A Graphic Printing : 8 points per column
(ESC "*" 0, ESC "*" 1, ESC "*" 2 or ESC "*" 3)
x x
ESC "-" 1B 2D Underscore ON:OFF x x
ESC "2" 1B 32 Sets interlining to 0 x x
ESC "3" 1B 33 Sets interlining to n x x
ESC "@" 1B 40 Soft reset x x
ESC "C" 1B 43 Page length
x x
ESC "D" 1B 44 Sets tabulations x x
ESC "F" 1B 46 Font selection x
ESC "J" 1B 4A Advance of n lines of dots
x x
ESC "K" 1B 4B Graphic Printing : 8 dots/columns
x x
ESC "L" 1B 4C Graphic Printing : 8 dots/columns x x
ESC "M" 1B 4D Selection of the font 1 (6x10) x
ESC "P" 1B 50 Selection of the font 2 (10x10)
x
ESC "R" 1B 52 Selection of national characters
x x
ESC "S" 1B 53 Control of status DEL x
ESC "V" 1B 56 Synchronisation character (RS232 only)
x
ESC "W" 1B 57 Character widening
x x
ESC "Y" 1B 59 Graphic Printing : 8 dots/columns
x x
ESC "Z" 1B 5A Graphic Printing : 8 dots/columns
x x
ESC "a" 1B 61 Selection of the alignment
x x
ESC "f" 1B 66 Printing of 1 line of dots
x
ESC "g" 1B 67 Selection of the font 1 (6x10)
x
ESC "j" 1B 6A Prints but do not go back
x
ESC "t" 1B 74 Selection of the table of the characters codes
x
ESC "x" 1B 78 Selects the printing NLQ or Draft
x
ESC "w" 1B 77 Elongation of the characters
x x
ESC "{" 1B 7B Selection of the direction of the printout : Text or Data x x
GS "V" 1D 56 Advances to the cutting bar, then n/2 lines of dots
x
GS "[" 1D 5B Switch acquisition (RS232 only)
x
GS "]" 1D 5E Configuration of the switches
x
GS "^" 1D 5E Activation of the timer x
GS "c" 1D 63 Date stamping & clock setting (clock option non available) x
GS "m" 1D 6D Printing of a pre-stored message
x
GS "p" 1D 70 Printing of the logo x
GS "s" 1D 73 Programmation of the messages & logo x
GS "u" 1D 75 Transmission of data trough the serial. (RS232 only) x
GS "v" 1D 76 Return of data towards the emitter. (RS232 only) x