12)
Take main sheet and put through hole in main
boom. Then insert sheet hook into hole in boom
and slide back rubber O-ring to lock.
Repeat with jib sheet and jib boom.
Boom
Rubber O-ring lock
Sheet line hook
Place hook in hole.
Main /Jib sheet
Slide rubber o-ring to lock in place.
Determining the correct position for the main sheet line hook :
When the left stick on the transmitter is down (in the ‘back’
position) the booms should look like the drawing above.
You may have to experiment with putting the hook in different
holes to get the correct position.
Transmitter
POWER
ON
OFF
3
10
