This section offers a general explanation of how properly to install the antenna. Installation of
the antenna must be accomplished by or under the supervision of an authorized dealer for the
Limited Warranty to be valid and in force. The steps in the installation and setup process are
as follows:
Unpacking the unit
Unpacking the unit
Unpacking the unit
Unpacking the unit
1. Open box and remove packing material.
The following items are included in the packaging of the antenna.
Item
Description
Quantity
1
Antenna Unit
1 each
2
IDU(In Door Unit)
1 each
3
Power Cable
1 each
4
Coaxial Cable (10m)
1 each
5
Coaxial Cable (1m)
1 each
6
User Manual
1 set
Table 2-1 Parts included
2. Lift dome out of box vertically. Then lift unit out of box vertically. Do not turn box
and “roll” out, or turn upside down to remove.
Figure 2-1 Unpacking the unit
Lift Unit straight
up out of the
carton!