ENGLISH
11
Menu Operation Guide
Press Menu key on the Keypad to display
the main menu. The menu consists of 7
menu options as shown below.
• LNB CONFIGURATION
• DISH SETUP
• POSITIONER SETUP
• TER SETUP
• CABLE SETUP
• SYSTEM SETUP
• ANGLE CALCULATION
Use the
qp
keys to move the cursor up or down in the menu. Use OK key to confirms
a selection. To escape the menu system at anytime, press EXIT key.
1. LNB configuration
1. LNB:
Use
t
u
button to select the LNB
2. L.O. Frequency:
Enter the proper
LNB frequency referring to your LNB
using the numeric key on the keypad.
3. LNB Voltage:
Use
t
u
button to se-
lect the LNB power.
4. LNB Dish:
Use
t
u
button to select
the dish type, Fixed, Moved or Unicable.
5. DiSEqC Switch:
Use
t
u
button to
select DiSEqC type.
6. DiSEqC Input:
Use
t
u
button to se-
lect the port number to get the RF sig-
nal from the LNB, which is connected to
DiSEqC switching box. Range 1~4.
7. DiSEqC Repeat:
Number of repeat
of the DiSEqC command.
8. 22KHz Switch:
Use
t
u
button to
select switch 22KHz.
