06
07
Mounting types of the TV bracket
Mounting the TV holder
ENGLISH
ENGLISH
1. Insert the sound bar into the TV holder as shown below. Make sure that the soundbar with the speakers
(metal grille) is facing forward.
Depending on the TV type, you must use different screws to mount the bracket on the TV.
The following screws are supplied with the TV:
Screw set A
4,8 x 14 mm coarse thread (blunt)
Screw set B
3 x 12 mm Coarse thread (pointed)
Screw set C
M4 x 14 mm fine thread (washer)
Fastening with the respective screws
2. The holes in the bracket must match the holes
on the back of the TV and be fastened with four
screws as shown (depending on the model,
with 2 or 4 screws).
Screw / Dowel set D
3,9 x 35 mm coarse thread (pointed) / Ø 6 mm dowel
Use these screws for wall mounting to attach
the two wall bracket adapters. For stone
walls, you must first drill dowel holes and
fasten the screws using the dowels.
Use these screws if the mounting
holes of the TV are made of
plastic. The thread is screwed in
through the screws.
Use these screws if you want to
mount the wall bracket adapters
directly to the sound bar.
Use these screws if the mounting
holes of the TV have a metal
thread.
3. Depending on the model, the bracket may not
rest flat on some TVs. Use the supplied adapter
plate for this purpose. This is placed between
the holes of the TV and the holder.
Wall bracket adapter (alternative mounting)
Use the
screw set B
and screw the following screws the
two adapters directly into the housing of the sound bar.
Before fixing the holes must be pre-drilled (2 mm)!
The mounting is possible on the top or on the back.
The distance from the wall mount adapter to the
outside of the soundbar is 5 cm.
Attention:
Only pierce the housing wall.
5 cm
5 cm
Rear or top of the sound bar