ENGLISH
ENGLISH
10
11
Add
Add satellite by using the Red key. Here
you can input new Satellite angle, Sa-
tellite Direction (east, west), Band (ku,c).
OK to confirm the setting and this new
satellite will be added to the end of the
Satellite list.
Transponder List
If you change the satellite, the transpon-
der will be changed automatically. You
will find the transponder list of selected
satellite here. Press the sat button can
switch the TP and SAT list. In this menu
you can Add, Edit, Delete, Transponder.
The Operation similar to the above, you
can input the transponder frequency,
symbol rate, and choose polarization
(Ver, Hor)
B: LNB Type and LNB Power
Here you need to check the LNB frequen-
cy according to your antenna, set the
correct frequency or define yourself, and
keep LNB power to be 13/18V.
C: 22KHz
In case you are using two antennas con-
nected to a 22KHz tone switch box. You
can supply either 22KHz by setting “OFF”
to select antenna.
D: DiSEqC1.0 DiSEqC1.1
If you connect antenna to DiSEqC Switch,
you need to specify the DiSEqC input to
which your selected satellite have been
configured.
E: Motor
When you enable this option, and press
OK, you will get this window to show you
how to adjust position of the dish.
Edit
Select the satellite then press green but-
ton. You can change the satellite’s name,
angle, direction and band. Input the cha-
racters which you want to edit using the
browser.
Delete
You can delete the user’s satellite. Select
the satellite that you want to delete from
the satellite list. You will be asked to con-
firm whether delete the satellite or not. If
you press ok key, all the channels in the
selected satellite and transponder will
be deleted, and the selected satellite will
disappear.
4. Installation and Operation
4. Installation and Operation
