After connecting the receiver to other required equipment, turn on the receiver, there
should be no channel information available at first. You need to follow the procedure to
setup your receiver to search the channel.
Main Menu
Press
MENU
button to activate main menu, main menu consists of Installation, Service
organization, Output, System, Timer, USB.
Use UP/DOWN button to select your subject and press OK to confirm your selection and
enter that sub menu, press EXIT button you can return to the previous menu.
Select Installation, the picture will be
displayed like this, here you can do Dish
setup, Restore Factory Default, Software
Update, Save or Load STB data
Antenna Settings
Press OK to Enter Dish setup, here you
can make Satellite Scan, Satellite Edit, TP
Search, TP Edit and other related Func-
tions.
A: Satellite List
This window shows the pre-stored satel-
lite list, in this menu, you can Add, Edit,
Delete, Satellites.
4.1 Installation
4. Installation and Operation
ENGLISH
ENGLISH
08
09
You can connect one fixed dish LNB directly to the LNB IN, or connect at least two dish
LNB by DiSEqC Switch, you can also connect to HH mount dish LNB.
HDMI
Coax cable
Dish
TV
The following diagram shows you how to connect the HD receiver, TV, LNB and other
equipment, please read this first if you are not sure about the connection, and it will
guide you to the correct connection.
3.1 Connecting to Dish LNB and TV
3. Installation and Connection
LNB
