![background image](http://html1.mh-extra.com/html/megasat/hd-900-twin-ci/hd-900-twin-ci_user-manual_1765159020.webp)
ENGLISH
ENGLISH
12
13
Following are some useful functions for your reference.
Move Auto [W/E]
Press RIGHT/LEFT button, the dish will be motorized to East/West continuously, it will
stop until it find the best signal.
Move Continue
Press RIGHT/LEFT button, the dish will be motorized to East/West continuously, until you
press LEFT/RIGHT again.
Move Step
Press RIGHT/LEFT button, the dish will be motorized to East/West by step.
Store Position
Save the current position you searched for the selected satellite.
Go to Position
Press OK button to move the dish to the stored position.
Go to Reference
Press OK button to move the dish to 0 position.
Set West Limit
Enable West limit.
Set East Limit
Enable East limit.
Disable Limit
Disable West limit and East limit.
4. Installation and Operation
4. Installation and Operation
3. Satellite List
This window shows the pre-stored satel-
lite list, in this menu, you can Add, Edit,
Delete, Satellites.
A: Add
Add satellite by using the GREEN button.
Here you can input new Satellite angle,
Satellite Longitude, and press Yellow (OK)
button to confirm the setting and this
new satellite will be added to the end of
the Satellite list.
B: Edit
Select the satellite then press RED but-
ton. You can change the satellite’s name,
and Longitude.
C: Delete
You can delete the user’s satellite. Select
the satellite that you want to delete from
the satellite list. You will be asked to con-
firm whether delete the satellite or not. If
you press ok key, all the channels in the
selected satellite and transponder will
be deleted, and the selected satellite will
disappear.