ENGLISH
ENGLISH
10
11
How to connect the HDD (2.5” Hard Disk Drive) to the STB
In the field of installation of an internal hard disk you remove request the terminal con-
nection of the front USB terminal connection from the main board and replace this with
the terminal connection of the internal hard disk mount.
A concurrent operation of the built-in hard disk and the front USB terminal connection
isn‘t possible.
1. Open the metal cover of this STB by unscrews three screws at the back panel, you
will see a HDD bracket is build inside this receiver.
2. User can install their 2.5” HDD hard drive to the HDD bracket easily by themselves,
and in this way, you will have a PVR Recorder with HDD inside for your box.
3. Screws the HDD into the HDD bracket by four screws in the gift box manually
without a screw driver.
WARNNING!!
ALL YOUR INSTALLATION MUST BE CARRIED OUT IN POWER OFF STATUS!!
Now, the installation of HDD hard drive to your STB is finished in just few easy steps, and
your STB has now a fixed data storage !! Enjoy !!
3.2 Connecting to HDD
4. Installation and Operation
3. Installation and Connection
After connecting the receiver to other required equipment, turn on the receiver, there
should be no channel information available at first. You need to follow the procedure to
setup your receiver to search the channel.
Main Menu
Press
MENU
button to activate main menu, main menu consists of Installation, Service
organization, Output, System, Timer, USB.
Use UP/DOWN button to select your subject and press OK to confirm your selection and
enter that sub menu, press EXIT button you can return to the previous menu.
Select Installation, the picture will be dis-
played like this, here you can do Dish se-
tup, Satellite/TP Editing, Satellite Search
etc…
1. Antenna Connection
Press OK to Enter, here you can select
your Tuner method, Fixes or Motor.
2. Motor Setup
If you are using a Motor, please go to
Antenna Setup, and you can choose for
DiSEqC 1.2 or USALS to set up your Motor.
4.1 Installation
