05
ENGLISH
2. Connection & Access to the Server
LNB 2
LNB 1
Factory setting
Power supply
Reset button
LAN
USB
Connection with a Single LNB, Twin LNB or Multiswitch
Single LNB
LNB 1
Twin LNB
LNB 1 / LNB 2
Multiswitch (1st line)
LNB 1
Multiswitch (2nd line)
LNB 2
Connection with a Unicable LNB or Unicable system
Unicable LNB / Unicable System
LNB 1 / LNB 2 (with Splitter)
Connection with a JESS LNB or JESS system
JESS LNB / JESS System
LNB 1 / LNB 2 (with Splitter)
1. Connect the SAT>IP server to your Internet router. Use a suitable LAN cable.
2. Connect the coaxial cables from the LNB or multiswitch to the corresponding
connections (see table).
3. If you have connected all cables, you can plug in the power supply.
2.1 Connecting the server
Note:
If you are using Unicable or JESS, you must make further settings in the „System
settings“ menu item.