4
12. SLEEP button
a. Press the SLEEP button, the sleeping indicator light of indoor unit flashes.
b. Ables the set temperature to increase 1°C after 1 hour and another 1°C automatically after 1 hour.
c. After the setting of sleeping mode, the heating operation enables the set temperature to drop 2°C
after 1 hour and another 2°C automatically after 1 hour.
d. The air conditioner runs in sleeping mode for 7 hours and stops automatically.
Remark: Press the MODE or ON/OFF button, the remote control clears sleeping mode away.
13. SWING button
(not applicable in this model)
Press this button, the horizontal wind direction vanes can rotate automatically, when you have the
desired vertical wind direction, press it again, the horizontal wind direction vanes will be stopped at the
situation of your choice.
14. HEALTH button
Press this button, you can turn on or off the health function.
15. FUNGUSPROOF button
This A/C has special dry and anti-mold function which has ”yes” or ”no” two selections. This function is
controlled by the remote control under cooling and dry modes, the internal fan runs for three minutes
with weak wind before stop. The purpose of this function is to dry the inside of the evaporator and to
prevent the evaporator from going moldy due to water deposition and thus dispersing strange smell.
Note:
This function has not been set in the factory. You may freely set and cancel this function.
The setting method is: under ON status of the A/C, point the remote control toward the A/C
and continuously press FUNGUSPROOF push button for one time, the buzzer beeps six
times continually again after five beeps, indicating that this function is ready. In case this
function has been set, unless the whole A/C is powered off or the function is manually
cancelled, the A/C then has this function as a default;
To cancel the function: 1. Power off the whole A/C. 2. Under ON status of the A/C, point the
remote control toward the A/C and continuously press FUNGUSPROOF push button for
one time, the buzzer beeps three times continually again after five beeps, indicating that
this function has been cancelled;
This function will not run in case of time stop or sleep stop.
Usage
Fix batteries
1. Slide open the cover according the direction indicated by arrowhead.
2. Put in two new AAA-batteries, position the batteries to right electric poles (+ and -).
3. Put back the cover.