14
A
b) Insert Side Burner Control Knob (M) onto
the valve stem and tighten it. As shown in Fig. 14.
11. Side Burner Installation
a) From underneath the side burner remove
two screws which are assembled on the
bottom of the side burner shelf (D). Open
side burner lid and place the Side Tube
Burner (U) through the opening. Place the
Side Tube Burner (U) tube over the side burner
gas valve and make sure Side Burner gas valve
is inserted into side burner tube. As shown
in Fig.15. Then with two screws secure the side burner
from underneath to the Side Burner Shelf (D).
As shown in Fig. 15.
b) Then with two screws secure the side burner from
underneath to the Side Burner Shelf (D). As
shown in Fig 15.
c) Connect the ignition wire from Firebox Assembly (A)
control panel to the side burner igniter pin from
underneath the Side Burner Shelf & Control Panel (D)..
As shown in Fig. 15.
Note:
After completing side burner installation,
make sure there is no more than a 3 mm gap
between igniter pin and burner. As shown
in Fig. 16.
Fig.
14
Fig. 15
U
D
M
Fig. 16
Side burner
lgniter wire
Side burner
3mm
3 50
2 50
15 0
5 0
F
7 00
60 0
50 0
400
C
30 0
20 0
10050
