14
MAINTENANCE
CLEANING
The inside of the fireplace may require regular cleaning, especially during periods of peak use,
the frequency of this being indicated by experience. It is advisable to wear a dust mask,
protective gloves and safety glasses when cleaning.
WARNING! MAKE SURE THWE FIRE IS COMPLETELY BUNRED OUT BEFORE
ATTEMPTING TO CLEAN THE FIREPLACE.
Use a stiff brush and industrial type vacuum cleaner to dislodge and remove as much material
as possible, starting at the top of the fireplace and working down to the bottom. Particular
attention should be given to the air inlet controls, which can become obstructed.
GENERAL MAINTENANCE
Take this opportunity to check for any damaged parts inside the fireplace. In the event of
damage or broken components, please contact Megamaster Customer Service on:
TEL: +27 12 802 1515
Email: [email protected]
The fireplace and flue-way should be inspected and maintained when in a cold condition. NO
unauthorized modification of this product should be carried out. This fireplace requires regular
maintenance by a competent person.
FIREPLACE BODY
The fireplace is finished with a heat-resistant paint, which can be cleaned with a soft brush. Wait
until the fireplace has cooled down before doing this. This finish can be renovated with heat
resistant fireplace paint, although the paint may not be an exact match and it may be necessary
to repaint the complete fireplace.
If the fireplace is purely ornamental, painting will provide a durable, attractive finish. If the
fireplace is used for heating, a high temperature heat resistant paint (available from your
hardware or paint dealer) must be used, in either aerosol or brush applied form. Should rust
become apparent, clean thoroughly with a wire brush and apply a suitable anti-rust treatment.
During prolonged periods out of use, the air inlets should be left open and the door left slightly
ajar in order to circulate fresh air and discourage condensation from forming which could
encourage corrosion.
