Quick Start Guide
Pressing the Standby button toggles between standard ‘Running’ mode and
‘Standby’. Holding the Standby button activates ‘Away’ mode.
Running mode activates the heating schedule and is the default mode of
operation. Standby turns off Running mode until the next ‘heating period’ (see
next section) and reverts to the setback temperature. Away mode also reverts to
a preset setback (see setting modes), however this mode will remain active until
it is manually cancelled by pressing the Standby button once again (or on the
App). Holding When switching between the two modes and Standby, the target
temperature for each is briefly displayed in place of the current temperature.
When the Thermostat is working to achieve its target temperature, a flame
symbol is displayed.
Device Setup
This section will show you how to setup the basic functions of the Home
Thermostat including setting the target temperature, modes, and creating a
schedule. If you are using the Thermostat with the Lightwave Link, you can
setup these functions on the App.
It is always recommended to use the
Lightwave Link if anything more than a basic setup is desired.
The follow-
ing section will show you how to link the Thermostat to other LightwaveRF
Heating devices to integrate it into your heating system.
Basic Operation
The Standby button
Summary of Contents for lightwaverf JSJSLW921
Page 2: ......
