001
WorkMode
Display
TestMode
Advanced
Status
Escape
Address
Chinese English
Screen Saver Mode 1
Screen Rotation Off
Touch Enable On
Touch Rectify
001
WorkMode
Display
TestMode
Advanced
Status
Escape
Address
01. Pan 000
02. Pan Fine 000
03. Tilt 000
04. Tilt Fine 000
05. PT Speed 000
06. Strobe 000
07. Dimmer 000
001
WorkMode
Display
TestMode
Advanced
Status
Escape
Address
Pan Invert OFF
Tilt Invert OFF
P/T Rectify
ON
Pan Offset 018
Tilt Offset 005
Lamp on when PowerOn
Keep DMX Data OFF
Factory Setting
001
WorkMode
Display
TestMode
Advanced
Status
Escape
Address
Work Mode DMX...
Address 001
Version C.1.21
Elapse 001H 20M
Total 0034H51M
=
Display
•
Chinese=
To change the display language to Chinese select this option
by pressing
Enter
.
•
Screen Saver=
To select a different option for screen setting
1. Off= Display will remain on
2.Mode1= Display will turn off after no use
3.Mode 2= Display will show DMX Start Channel in green after no use
•
Screen Rotation=
To invert the display select this option by pressing
En-
ter
.
•
Touch Enable=
To activate the touch feature of the display select this
feature. Note if you want to go back to previous setting you need to use
buttons to reverse setting.
•
Touch Rectify=
Touch display calibration adjustment
=
Test Mode
•
Test Mode=
Gives you access to test each DMX Channel of the fixture
=
Advance
•
Pan Invert=
Inverts Pan movement
•
Tilt Invert=
Inverts Tilt movement
•
P/T Rectify=
Pan / Tilt auto correct engaged or turn off.
•
Pan Offset=
Pan Correction start position
•
Tilt Offset=
Tilt Correction start position
•
Lamp on when=
3 option on when to turn lamp on
1.Manual=
The lamp can be turn on or off via DMX Command
on
the control channel. Or lamp will be turned on once you have
in
structed the fixture via display. In the Work Mode lamp switch section.
2.Reset Done=
Lamp will turn on after fixture has finished reset
func-
tion
3. Power On=
Lamp will automatically turn on once fixture has
pow-
ered up.
•
Keep DMX Data=
If the DMX signal is lost when engaged the last com-
mand will remain. If not engaged the DMX signal will go to all 0 com-
mands.
•
Factory Setting=
Return all setting to factory default
=
Status
•
Status=
Gives you the operational overview of what the fixture is doing.
9
Summary of Contents for axis xtra 17R
Page 2: ......
