Note1: Factory default setting at 1second pulse grounded output
(See Alarm Feature
II – 2
Programming)
.
Note2: Upon activate the channel 3; the siren/horn will emit one chirp to indicator the channel 3 is latch on or
emit two chirps to indicator the channel 3 is latch off.
R. CHANNEL 4 TIMER CONTROL OUTPUT
Press the transmitter
and
F
buttons at the same time to active Channel 4 function.
Channel 4 is user-programmable timer output. You may program the built-in timer to send a momentary /
latch / latch with ignition / 30 seconds/ 60 seconds/ 90 seconds timer output.
Note1: Factory default setting at momentary output
(See Alarm Feature
II – 3
Programming)
.
Note2: Upon activate the channel 4; the siren/horn will emit one chirp to indicator the channel 4 is latch on or
emit two chirps to indicator the channel 4 is latch off.
S. POWER ON MEMONRY:
This security system is equipped with circuitry that will allow the unit to remember its alarm state if the power
is lost and then reconnected.
2-WAY LCD REMOTE TRANSCEIVER
:
Note: If the system is interfered by stronger radio frequency around, sources of high voltage electric power or
such Obstacles like tall buildings and so on, the transmission range may get shorter as the system uses
low out put powered frequency.
A. BATTERY REPLACEMENT:
A 1.5V type AAA Alkaline battery powers the Remote Transceiver. When the power of the battery weakens a
icon shall be displayed on the LCD screen. When the old battery is replaced to new one, there will be
beep sounds indicate the power is up and the clock on the LCD screen returns to
AM12:00
after displaying
all the icons. Correct the time by pressing
for 3 seconds before using (See Timer Setting).
Note : Press the
button two times when the battery compartment is empty, then insert the new battery.
B. THE REMORE LCD ICONS WITH FUNCTION:
Armed Mode
Your motorcycle is in armed mode
Disarm
The system is Disarm.
Remote Transmission
You are transmitting the signal to
control unit
In – Range Indicator
Your are within the remote control
range.
Activate on the Tilt Switch
(Zone 2)
Activate on the Close Loop
(Zone 3).
Activate on the Shock Sensor
(Zone 4)
Activate on the Warn away Trigger
Activate on the Ignition Switch
(Zone 5).
Time Monitor
Alert Alarm
You have set morning call alarm
Count Down Timer
Reminder when time is up for
parking
Power Save Mode
Save the battery power
MEGA 3100 OPERATE
8
Summary of Contents for MEGA 3100
Page 2: ...MEGA 3100 OPERATE 2 ...
Page 12: ...MEGA 3100 OPERATE 12 ...
