Megalarm MEGA 3100, Operation Manual

Page: 7 / 12

L. MOTORCYCLE LOCATOR:
Press the button on the 5-button 2-way transceiver or press the button on the 3-button transmitter
upon armed mode to active motorcycle locator function. The siren will chirp 6 times. The parking light will
flash 12 times, for you to easily locate your motorcycle.
M. PANIC FUNCTION:
The transmitter can be used as a remote panic switch to manually trigger the alarm in
case emergency. To activate the panic mode, press and hold or button of your
transmitter for 3 seconds. The siren will sound and continue for 30 seconds or until or
button is activated a second time.
N. TRIGGER THE SYSTEM
When armed, your motorcycle is protected as follows:
1. Light impacts will trigger the warn-away signal. A long chirp from siren/horn.
2. Heavy impacts will trigger the system. The full trigger sequence is 30 seconds of constant siren and
flashing parking lights.
3. If the tilt switch is triggered / the close loop wires of the connection are not in contact / the ignition is turned
on while the system is armed, the full trigger sequence will activate.
4. The starter kill prevents the motorcycle’s starter from cranking.
Activated on the
Tilt Sensor Activated on the
Close Loop Activated on the
Shock Sensor Activated on the
Ignition Switch
Warn-away
Trigger
Clear The Flash Icon And Melody Sound: While triggering the alarm the LCD screen will alert user through
melody sound and flashing trigger icon, press the button 3 times within 3 seconds will clear the flash
icon and stop melody sound on the LCD screen transceiver.
Stop The Melody Sound Only: While triggering the alarm the LCD screen will alert user through melody
sound and flashing trigger icon, press any button on the LCD remote transceiver to stop melody sound only.
NOISE ABATEMENT CIRCUIT: Your system has “Noise Abatement Circuit”. It prevents annoying
repetitive trigger sequences due to faulty sensor or environmental condition such as thunder, jackhammers
airport noise, etc.
Here’s how “Noise Abatement Circuit” works: The alarm triggers five times. Each time, the same sensor or
switch is triggering the alarm. “Noise Abatement Circuit” will interpret this pattern of triggers as false alarm.
After the fifth trigger, “Noise Abatement Circuit” ignores, or by pass, that sensor or switch until the other
sensor or switch is trigger.
O. SYSTEM’S TRIGGER CHECK
(For two-way transceiver operation only)
Press the transceiver button first, within 3 seconds press
(C)
button. It
responds with one melody sound and all trigger’s records will immediately displayed on
the LCD screen.
P. DRIVER PAGING / LOSE AND FOUND
(For two-way transceiver operation
only)
It is useful the event that someone wants to page the driver of the parked motorcycle or
someone cannot find his LCD motorcycle remote transceiver.
Upon disarmed, press and hold the Valet
switch for 2 seconds to page the driver, one
chirp sound shall be emitted from the motorcycle and the paging melody sound
continues sounding from you Remote LCD transceiver and “ ” indication flashes on
the LCD screen.
Q. CHANNEL 3 TIMER CONTROL OUTPUT.
Press and hold the
F
button on transmitter for two seconds to remote control the channel 3 output.
Channel 3 is user-programmable timer output. You may program the built-in timer to send a ground signal /
latch / latch with ignition / 30 seconds/ 60 seconds/ 90 seconds timer output.
MEGA 3100 OPERATE
7