Step 5.
Switch on the high voltage by HV ON/HV OFF switch. The output high voltage
pulses should be generated. Increase the amplitude and frequency by
corresponding knobs as necessary. The output pulses frequency in internal
triggering mode is about proportional to the rotation angle of FREQUENCY
regulation knob. The output pulses amplitude increases slightly while you rotate
AMPLITUDE knob from the most counterclockwise position to the middle
position and then increases faster while you rotate the knob to the most clockwise
position.
Step 6.
Always stop the operation of the generator by HV ON/HV OFF switch, after that
you can switch off the generator by power switch. Do not toggle EXT/INT switch
while high voltage is on. After long time of operation at high output pulse
amplitude and frequency please allow fans to rotate several minutes in idle mode
for cooling.
MEGAIMPULSE LTD. 8
