background image

32

Warranty

The Megaflo Compact Warranty provides unrivalled levels 

of customer support and peace of mind in the unlikely 

event that a problem arises from a manufacturing defect. 

It is supported by a large nationwide team of company-

employed field-based engineers and our own call centre, 

which is open 363 days a year.

The Megaflo Compact Warranty covers Megaflo Compact 

cylinders against corrosion for 25 years from date of 

original purchase.

The cold water inlet valve (and expansion vessel, where 

supplied) is covered by a five year warranty from the date 

of purchase of the Megaflo Compact product, that includes 

both parts and labour. All other components, including any 

other valves, fittings and controls supplied with the Megaflo 

Compact are covered by a two year warranty from the 

date of purchase of the Megaflo Compact product,  that  

includes both parts and labour.

In the case of the Megaflo Compact Systemready, Megaflo 

Compact Systemfit appliances,  the supplied pumps and 

motorized valves ( where fitted ) are also covered by this 

two year warranty.

Incoloy immersion  heaters ( where fitted ) are covered by a 

two year warranty.

Outside of the UK

These warranties are valid for installations within the United 

Kingdom.
For installation in the Republic of Ireland please contact 

Baxi Potterton Myson (Ireland) Limited on 
00353 (0) 1 4590870    

For installations outside of the United Kingdom and the 

Republic of Ireland, please telephone Megaflo Export on 

+44 1603 420271 for further details of the warranty terms 

and conditions applicable.

This warranty is valid provided that:

•  The Megaflo Compact product has been installed by 

a competent installer in accordance with the instructions 

contained in the installation instructions and in compliance 

with all relevant laws, guidance, codes of practice and 

regulations in force at the time of installation.                                                    

•  The Megaflo Compact product has not been modified or 

tampered with in any way, other than by a Heatrae Sadia or 

Baxi Customer Support approved engineer.  

•  The Megaflo Compact product has not been subject to 

damage by scale. 

•  The Megaflo Compact product and any part or parts of 

the Megaflo product (whether factory fitted or otherwise) 

have not been repaired or replaced other than by a Baxi 

Customer Support approved engineer and any replacement 

parts used on the Megaflo Compact product are authorised 

Megaflo Compact spare parts. 

•  The factory fitted Temperature /Pressure & Expansion 

Relief Valve has not been tampered with or removed.

•  The Megaflo Compact product has not been subject to 

misuse or neglect.    

•  The Megaflo Compact product has only been used for 

the storage of wholesome water. Should another substance 

be put through the product, the warranty will be invalid 

unless it is part of a disinfectant procedure carried out in 

accordance  with  BS  EN  806.                                                                                                                                            
  

•  The Megaflo Compact product has not been subjected to 

frost or freezing temperatures.

•  The Benchmark™ commissioning checklist service 

record, included in the Megaflo Compact  installation 

instructions has been completed.

•  Regular maintenance has been carried in accordance 

with the requirements set out in the maintenance section 

of the installation instructions, by a competent person, an 

approved engineer from Heatrae Sadia or any other part 

of the Baxi Groups Customer Support approved engineer      

ing team.                                                                

•  Access is available, at reasonable times and upon 

reasonable notice, to the Megaflo Compact product to allow 

for any inspection repair or replacement.                 

•  The product is registered within 60 days of purchase. 

This can be done by telephone, online or by using the 

registration  form  provided  with  the  product.                                                                

•  Evidence of purchase (for example a receipt or delivery 

note) and date of supply is submitted when making a claim.
      

•  The Megaflo Compact product has not been affected 

by any cause beyond our reasonable control including, 

without limitation:  an act of God, explosion, flood, fire or 

accident; war or civil disturbance; strike, industrial action or 

stoppages of work; any form of government intervention; 

a third party act or omission including theft or malicious 

damage; failure by you to give us a correct delivery address 

or notify us of any change of address.
    

.

If any of the following situations occur, the Megaflo  

Compact Warranty will NOT apply:

•  Any wilful or accidental damage caused by your 

negligence

•  Damage caused as a result of scale.

•  Installation not  in line with the installer and user manuals 

provided, 

•  Failure to comply with installation instructions (whether 

oral or in writing), 

•  Misuse of the Megaflo Compact product or alteration 

of the Megaflo product not in accordance with the 

requirements set out above.                                                                                                       

•  Defects which are  reported to us outside of the warranty 

period on 0344 8711535 or [email protected]

Summary of Contents for 2sf





































Reviews: