33
Elite 8 www.mega-motion.com
TILLER
LOCK
KNOB
BATTERY TIE-DOWN STRAP
BATTERY
HARNESS
FRONT-TO-REAR
HARNESS
V I I . D I S A S S E M B L Y A N D A S S E M B L Y
DISASSEMBLY
You can disassemble the Travel Scooter into six
pieces: the seat, the front section, the rear section,
the rear shroud, the basket, and the battery pack.
See figure 22
. No tools are required to
disassemble or assemble your Travel Scooter.
Always disassemble or assemble your Travel
Scooter on a level, dry surface with sufficient
room for you to work and move around—about 5
feet (1.5 meters) in all directions. Remember that
some Travel Scooter components are heavy and
you may need assistance when lifting them.
WARNING! Do not lift weight
beyond your physical capability.
Ask for assistance when
necessary while disassembling or
assembling your Travel Scooter.
SEAT
REAR SECTION
BATTERY PACK
BASKET
FRONT SECTION
Figure 22. Disassembled Travel Scooter
1. Remove the key from the key switch.
2. Lock the tiller in the straight ahead position by pushing the tiller lock knob in and turning it clockwise
90°.
See figure 23
. The front wheel must face forward in order to lock the tiller.
3. Remove the seat by lifting it straight up and off of the Travel Scooter. If you encounter resistance when
removing the seat, disengage the seat rotation lever and swivel the seat back and forth while lifting up
on the seat.
4. Remove the rear shroud by lifting it straight up and off of the Travel Scooter.
5. Disconnect the battery harness.
See figure 25
.
6. Disconnect the front-to-rear harness.
See figure 25
.
7. Disconnect the battery tie-down strap.
8. Remove the battery pack from the Travel Scooter by lifting it straight up and off of the Travel Scooter.
Figure 24. Tiller Lock Knob (Unlocked)
Figure 23. Tiller Lock knob (Locked)
Figure 25. Harness Connections
REAR
SHROUD
TILLER
LOCK
KNOB
