This fixture is equipped with a auto switchable power supply that will let the unit operate from 110V or 220V from 50Hz to 60Hz.
6
Main Power Connection
Caution!
1.
Do not connect fixture to a dimmer system.
2.
This unit has Auto switching power supply. It will respond to 110V or 220V automatically
3.
This unit must be earthed. (electronically grounded)
4.
Replace fuse only with the specified type and rating.
The occupation of the connection-cable is as follows:
1
2
3
1
3
2
DMX-512 Connection
110V Connection
The fixture is equipped with 3 pin XLR Sockets for DMX input and output. The sockets are wired in parallel. Only use a shielded
twisted pair cable designed for RS-485 and 3 pin XLR plugs and connectors in order to connect the controller with the fixture or
the fixture with another.
DMX—input
DMX—output
1. Shield
2. Signal (-)
3. Signal (+)
Caution!
At the last fixture the DMX signal needs to be terminated with a terminator. Solder a 120
Ohm resistor between the (-) and the (+) signal into a 3 pin XLR plug and plug it in to the
last fixture on the signal run. Pre-manufactured terminator plugs are available for
purchase from your Mega-Lite dealer (HOS-DMXT).
Cable (USA)
Cable (EU)
Pin
Connection
Black
Brown
White
Green
Light Blue
Yellow/Green
Live
Neutral
Ground
L
N
Cable (USA)
Cable (EU)
Pin
Connection
Black
Brown
White
Green
Light Blue
Yellow/Green
Live
Live
L
N
220V Connection
L
N
Summary of Contents for UniColor
Page 2: ......
