Check that the unit has not been damaged during transport
Protection Against Fire
1.
Maintain a minimum of 1 foot distance from any type of flame.
2.
Replace fuse only with the specified type and rating.
3.
Do Not install the unit to close to a heat source.
4.
Make sure cable are properly secured away from unit movement.
5.
Maximum surface operating temperature 80
º.
Protection Against Fire
1.
Disconnect power before servicing.
2.
For connection to main power supply proceed to page 4.
3.
This unit must be earthed. (electronically grounded)
4.
Do not expose unit to rain or moisture.
Protection Against Mechanical Hazards
1.
Make sure head movement is not blocked.
2.
Use safety chain when hanging unit
3.
Unit surface may reach high temperature. Allow about 5 minutes after lamp has been turned off be-
fore moving.
3
