LED Moving Head Wash 3610 MJ-1006C User Manual ver2.0
www.mjledlighting.com
5
Use 1pcs clamp and safety cord(need to purchase).Use clamp fix with light hook which
in the packing box with light, then use screw install to the bottom of lamp. Hang the
fixture on the structure and fasten the screws attached to each clamp. Make sure the light
is installed reliable, and confirm the light which you fixed is strong enough for hanging
the light. Base on safety reason, please according to the above picture using safety wire
cross the light to make it strong enough again.
Warning!
1
．
Hook and clamp only use for hanging the light. Do not use clamp as a tool to move
fixtures.
2
．
Base on safety reason, please use the safety cord which can afford the weight ten times
of lamp through Insurance hole for auxiliary hanging.
3
．
Don't use the handle of the moving head light to fixed or lift!
Power Code Connection:
Connect the power cord as follows:
L (live) =brown
E (earth) =yellow/green
N (neutral) =blue
Use the plug provided to connect the mains power to the projector paying attention to the
voltage and frequency marked on the panel of the projector. It is recommended that each
projector be supplied separately so that they may be individually switched on and off.
★
It is essential that each projector is correctly earthed and the electrical installation
conforms to all relevant standards.
DMX Connection:
