800778-1.4
E
M
OTION
F
AROS
S
ERIES
M
ANUAL
.
DOC
Virhe. Määritä Aloitus-välilehdessä Heading 1;Pääotsikko, jota haluat käyttää tähän kirjoitettavaan
tekstiin.
20 (40)
4.1 ECG Electrode Placement
The eMotion Faros Sensors are compatible with 4 mm snap connector ECG Electrodes, like Ambu
Blue Sensor M-00-S or VLC-00-S. Place the electrodes on the subject according to the instructions
illustrated in Figure 12-14 and connect the snap connector electrode wires to the electrodes.
The user should be familiar with correct placement of electrodes. Failure to correctly place
the electrodes will weaken the data acquisition reliability.
The quality of an ECG measurement depends on preparation and the skin-electrode
resistance value. To ensure quality of ECG and to minimize skin-electrode resistance,
follow these casual instructions.
Place electrodes on intact, clean and dry skin. Shave off excess body hair from electrode
are, if needed
Thoroughly clean the area with alcohol,
Let area dry before applying electrodes.
Figures 12-14 presents illustrative position of electrode placement
A and B set-up are for 1-channel ECG data acquisition.
C set-up is for 3-channel ECG data acquisition with Faros 360.
NOT
E!
