800778-1.4
E
M
OTION
F
AROS
S
ERIES
M
ANUAL
.
DOC
Virhe. Määritä Aloitus-välilehdessä Heading 1;Pääotsikko, jota haluat käyttää tähän kirjoitettavaan
tekstiin.
14 (40)
3. Measurement Preparation
With Faros Sensor Manager it is possible to change acquisition configuration. Electrocardiograph
data acquisition is possible to perform in offline data logger mode. Data is logged in SDF/ASC or in
EDF -format.
Online data acquisition is possible to perform with Faros 180 and Faros 360 models. Bluetooth
data acquisition is supported with eMotion ECG Mobile software (LiveECG application).
User can make markers to measurement by pressing
Saved file format must be EDF.
eMotion Faros Device Manager Overview
Connect your eMotion Faros Sensor to computer via USB Cable and wait until Windows
has finished the installation of the device drivers
Check that ‘Measurement and Power on Indicator’
shine continuously
Browse to FAROS_xxx hard drive and open the
“Software” folder from the hard drive.
Open eMotion Faros Manager folder and
r
un ‘eMotionFarosManager’.
Set the configuration which you want to
use for data acquisition
Example Settings are presented in chapters:
3.1 Offline ECG Data Acquisition
3.2 Online ECG mode
3.3 Heart Rate Variability Acquisition
Faros Manager recognizes the
model of connected eMotion Faros
sensor and present configuration
options based on sensor model.
If you wish to synchronize the clock of the device
select ‘Synchronize’ before saving the
settings.
Before first use of the device clock must be synchronized.
When you are ready press
‘Save’ button to apply setting
Press
‘Close’ to exit application
NOT
E!
NOT
E!
NOT
E!
