6.
Select the temperature and speed required, typically 130ºC and Speed 1
for metals and 110ºC – Speed 1-2 for printed circuit boards.
&
Make sure that the operating temperature has been reached by pressing the
button
.
Feed the card squarely into the middle of the rollers and hold the back edge
of the dry film with both hands up against the edge of the plastic front edge of
the roller cover firmly to ensure film is kept tensioned as it is going through the
Laminator. (see figure 3 below)
MEAS
Do not hold the film too tightly – just firm enough to
keep smooth and to stop creasing
Dry Film to be held in both hands as card and
material being laminated pass through the roller
Roller Cover
BACKING PAPER OR CARD
Material to be
laminated
Figure 3
Page
10
0
Mega Electronics Ltd., : Tel +44 (0) 1223 893900
HOT
MOUNT