Meet PAT™
| Products and Things Pty Ltd |
meetpat.com.au
| Level 1, 419 Townsend Street, Albury, NSW, 2640, Australia
Phone: (02) 60217813, +61260217813 Email: [email protected]
Meet PAT™
| Meet PAT Limited NZ |
meetpat.co.nz
| 12 Bethlehem Road, Bethlehem, Tauranga, 3100
Page 7
MP-TO-01 - “The one” -
edge Plumbing - Installation
50mm
*min clearance
from the wall
to the unit
*An external water
trap is required for
the top plumbing
position.
Not supplied with
the unit.
*The plumbing
can be configured
to exit the unit
from two possible
locations.
190mm
475mm
Attaching to an existing structure
Embedding in concrete
Installation Kit -
Not included
Base plate - sizing
*Unit can be fixed to any flooring structure
Meetpat recommends
4 x M12 Countersunk
Stainless Steel fasteners. Not included.
Length and type of the fastener to be confirmed
by installer.
*Unit can be embedded into a new concrete slab.
Meetpat recommends a minimum slab size of
550W x 550L x 200mmD
This may need to be increased or reinforced
depending on sub surface conditions.
Confirm with installer for suitable slab site.
Please contact Meetpat for a installation kit.
Mounting Plate
4 x M12 Stainless
Steel bolts
150mm
210mm
200mm
260mm
*Two holes are required
to be cut in the side of
the unit for the plumbing.
25mm
45mm
