MEERSTETTER LTR-1200, User Manual

Page: 16 / 18

Page 16 (18)
5171
31.07.13 TB
22.10.14 TB
LTR-1200 User Manual
3.3.3 AC Mains Supply
The main power connector is a 3-pol Connector for IEC C13 Cables
Symbol Parameter Comments Min Typ Max Units
Electrical Characteristics
V
ACnom
Nominal Input Voltage Single Phase 100 240 V
V
AC
Input Voltage Continuous 90 264 V
V
ACtrans
Input Transients 60ms 300 V
f
AC
Input Frequency 47 50/60 63 Hz
P
IN
Input Power* 1 - 4 Power Supplies 400 1600* W
P
IN110
Input Power (110V
AC
) 1 - 4 Power Supplies 400 1100 W
Protection Characteristics
Fuse
Slow Fuse Integrated into Connector 10 A
* When operated on 110V
AC
mains supply, the max input power is derated to 1100W due to the 10A fuse
built into the standard IEC C13 housing. Please contact Meerstetter Engineering if you require an
alternative connector.
3.4 Error Numbers
Error Numbers 1 to 99 are universal error numbers, which are identically on each device. For all other
universal error numbers please refer to the LDD-Family or TEC-Family User Manuals.
Error Numbers 100 and above are HMI (LTR)-specific.
3.4.1 RTOS Errors
# Code Description Error Condition, Remedy
80
RTOS_STACKOVERFLOW
One task has a stack overflow
Please contact Meerstetter
Engineering
81
RTOS_MALLOCFAIL
Can not allocate memory
Please contact Meerstetter
Engineering
3.4.2 Routing Errors
# Code Description Error Condition, Remedy
100
ROUTING_LOSTFRAME
The routing task has lost a
frame
Lost frame on internal bus
101
COM_TIMEOUT
Communication timeout to an
internal device occurred
No answer for 3x100 ms
102
ADDRESS_CONFLICT
Two internal devices use the
same address on the bus Two identically addresses
detected
3.4.3 HMI Errors
# Code Description Error Condition, Remedy
110
DEVICE_VERSION
HMI and device firmware
versions not compatible Update all device firmware to
the actual version.
111
DEVICE_MISSING
Unassigned rack output
terminal detected
Try to reboot the LTR-1200
112
MENU_OWERFLOW
Menu memory overflow
Please contact Meerstetter
Engineering
113
UNKNOWN_DEVICE
Unknown internal device
recognized Please contact Meerstetter
Engineering