Meech CyClean, Operating Manual

Page: 20 / 44

20
Troubleshooting
Problem Cause Solution
No blolwing or vacuum pressure. Loose duct connection. Check all ducting connections are secure
and that there is no damage.
Duct layout. Check the ducting layout to ensure there are
no tight bends.
AHU fault. Check power is connected to AHU and that
line interlocks are good (if used). Consult
AHU manual for full operating instructions.
Removable panel of ducting manifold is
not connected fully Visually check the duct manifold and feel for
air flow. Re-fit removable panel.
No ionisation. Various. See the Meech fault finding guide for the
Meech Model A905 ionising power supply
and A914 AC ionising bars, which can be
downloaded directly from the Meech website
at www.meech.com
If the problem being experienced is not listed above, or the remedy is unclear please contact Meech International directly or your
local Meech distributor.