EN
59
SURFACE WORKING
Reduce the cultivating depth to work the surface.
Working on slopes
DANGER: Risk of personal injury and/or material damage if the machine rolls over.
•
Be very careful when changing direction, and when on slopes. Work across slopes, never up or down.
•
Remove foreign objects from the area where the machine is to be used. Do not work close to large stones.
•
Do not use the machine on slopes with a gradient greater than 20%.
5. Auxiliary equipment
At the rear of the machine there is a welded plate with holes, mounted on the plough bar: the auxiliary equipment plate. This is used to attach
auxiliary equipment.
TRANSPORT
Transport over short distances
The wheels on the plough bar are used to transport between work areas.
1.
Insert the plough bar in the bracket with the wheels facing down (fig. 1).
2.
Press down on the handle so that the rotating blades are lifted off the ground.
3.
Move the machine with caution.
Transport over longer distances
WARNING: Do not transport the machine upside down or on its side. The machine must stand on the rotating blades and wheels.
WARNING:
Do not tilt the gearbox and do not put it on the side or upside down.
Prior to transport
•
Turn off the engine. Allow the engine to cool.
•
Release the spark plug lead from the spark plug.
If the machine is transported on a trailer or the like, it should be secured so that it cannot move and cause damage. Remove the engine from
the gearbox to transport it in smaller spaces, such as the boot of a car,
Dismantling the engine from the gearbox
Transport over longer distances is facilitated if the engine is removed from the gearbox.
WARNING: Exercise care to ensure that the clutch lever is not damaged when the engine is removed and reassembled.
1.
Release the spark plug lead from the spark plug.
2.
Disconnect the clutch cable from the engine.
– Unscrew the clutch cable’s screw.
– Loosen the clutch cable and the spring from the hole in the handle.
3.
Loosen the screw (pos. 2, fig. 12) from the bracket (pos. 1, fig. 12.
4.
Loosen the bracket from the mount ring on the gearbox and the clutch.
5.
Loosen the engine and clutch.
12
1
2
3
Summary of Contents for 721-438
Page 65: ......
