EN
57
• Pull out the plug before servicing.
• Remove all service tools. Make a habit of checking that all service tools are
removed from the saw before connecting it to the mains.
• Avoid accidental starting.
– Do not carry a tool with one finger on the power switch when the power
cord is plugged in.
• Use the correct extension cords.
– When using extension cords outdoors, only use those intended for
outdoor use.
– Use extension cords with a sufficient cross-sectional area and unwind the
entire cord.
• Use your common sense and be careful.
– Think before doing something, so that you can do it safely.
– Do not use the saw if you are tired, on under the influence of
medication, etc.
• Before starting the saw, check the following:
– That all the guards and other parts are undamaged and in working order.
– That all moving parts can rotate freely and are correctly aligned.
– That no moving parts can fasten.
– That no faults have occurred.
– Other circumstances that can affect the work.
• Use the recommended accessories.
– Using non-recommended accessories can result in accidents or the risk of
personal injury.
– Repairs must be carried by an authorised technician.
• Check that the saw corresponds to local safety requirements.
• The saw must always be repaired by an expert using original spare parts,
otherwise the saw can cause accidents or the risk of personal injury.
