Meec tools 210-024, Operating Instructions Manual

Page: 18 / 23

ENGLISH
18
ENGLISH
SAFETY INSTRUCTIONS
Read the Operating Instructions carefully before use!

Always take basic safety precautions when using the unit to safeguard against the risk of fire, electric
shock and/or personal injury.

Failure to follow all the instructions and safety instructions can result in the risk of electric shock, fire
and/or serious personal injury.
Symbol Meaning
DANGER
WARNING
IMPORTANT:
WARNING!

Keep bystanders at a safe distance when using the unit.

People who have a pacemaker should consult their doctor before using the unit or when in close
proximity of the unit when it is running.

Installation, use and maintenance must only be carried out by qualified personnel.

Persons who are not familiar with these instructions must not use the unit.

The unit must not be used for any purpose other than welding.

Check that the mains voltage corresponds to the rated voltage on the type plate.

The unit must not be used to thaw frozen pipes.
Precautions against fire and/or explosion

Never weld on containers that contain solid, liquid or gaseous combustible materials.

There must be no flammable materials in the vicinity of the welding site.

Never weld on tight, gas-filled containers, pipes or the like.

Make sure the welding cables are connected properly and that their insulation is not damaged.

Never place hot workpieces close to flammable materials.

A functioning fire extinguisher should always be close at hand.

Never grind close to the inverter welder.

Metal grinding dust can cause electric shock and/or damage to property.
Safety precautions to prevent electric shock

Never touch live parts – risk of electric shock.

The unit generates dangerous voltage. Never touch live parts.

The unit may only be connected to an earthed mains supply. Check that the workpiece is properly
earthed before welding.

Switch off the unit and unplug the power cord before installation, maintenance or repairs.

Switch off the unit and unplug the power cord before replacing the electrode holder.

Never use welding cables that have a too small cross section or have damaged insulation.

Always wear dry, insulated work gloves.

Never plug in the power cord or switch on the unit unless the case is fitted.

Use appropriate protective equipment if the unit is used in confined spaces or at height.

Switch off the unit and unplug the power cord after use.

Do not use the unit in damp or wet areas. Do not expose the unit to rain.