EN
20
• Keep hands away from the cutting area.
Never reach under the material that is
being cut.
• Do not use dull or damaged saw blades
and accessories.
SYMBOLS
Read the instructions.
Approved as per applicable
directives.
Safety class II.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Output
500 W
Speed, no load
800 – 3000/min
Protection class
II
Sound power level, LwA
100 dB(A), K= 3 dB
Sound pressure level, LpA 89 dB (A), K= 3 dB
Vibration level (tree)
8.5 m/s², K= 1,5 m/s²
Vibration level (metal) 9.6 m/s², K= 1,5 m/s²
Always wear ear protection!
The declared vibration value, which has been
measured by a standardised test method, can
be used to compare different tools with each
other and for a preliminary assessment of
exposure. The measurement values have been
determined in accordance with: EN 60745-2-
11:2010.
WARNING! The actual vibration level when
using power tools may differ from the specified
maximum value, depending on how the tool
is used. It is therefore necessary to determine
which safety precautions are required to protect
the user, based on an estimate of exposure
in actual operating conditions (taking into
account all stages of the work cycle, e.g. the
time when the tool is switched off and when it
is idling, in addition to the start-up time).
DESCRIPTION
1. Lock-on button
2. Main switch
3. Cord guard
4. Dust extraction
5. Base plate
6. Hex wrench
7. Adapter tube
8. Blade clamp device
BILDE 1
OPERATION
ATTACHING OR CHANGING SAW
BLADE
Attach a blade to the tool with the blade quick-
clamp. Lift the transparent shield, loosen the
clamp device screw then insert the blade and
tighten the screw.
BILDE 2
Summary of Contents for 022047
Page 4: ...2 1 3 ...
