EN
28
WARNING!
The actual vibration level when using power
tools may differ from the specified maximum
value, depending on how the tool is used.
It is therefore necessary to determine which
safety precautions are required to protect
the user, based on an estimate of exposure
in actual operating conditions (taking into
account all stages of the work cycle, e.g. the
time when the tool is switched off and when
it is idling, in addition to the start-up time).
DESCRIPTION
1. Handle
2. Laser switch
3. Support handle
4. Laser line indication
5. Aluminium sole
6. Blade
7. Blade guard
ASSEMBLY
IMPORTANT:
Switch off the tool, pull out the plug, and
wait until all moving parts have completely
stopped before adjusting, maintenance and/
or replacing accessories.
CHANGING THE BLADE
WARNING!
Never use grinding discs.
1. Switch off the tool and unplug the plug.
2. Release the sole and lower it to its lowest
position.
3. Lock the blade with the supplied spanner.
4. Undo the locking screw and the washer.
Laser beam. Do not look into
the beam. Laser class 2.
P<1 mW
λ
650 nm
EN 60825-1:2007
Read the instructions.
Recycle as electrical waste.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Nominal output
1300 W
Max speed
4700 rpm
Safety class
II
Saw blade
Ø185
Sawing depth at 90°
0–63 mm
Sawing depth at 45°
0–42 mm
Cord length
3 m
Weight
4.3 kg
Sound power level, L
wA
104 dB(A), K=3 dB
Sound pressure level, L
pA
93 dB(A), K=3 dB
Vibration level, ah
4.03 m/s², K=1.5 m/s²
Always wear ear protection.
The measurement values have been
determined in accordance with EN ISO 3744,
EN ISO 11203, EN ISO 5349-1, EN ISO 5349-2.
The declared vibration value, which has been
measured by a standardised test method, can
be used to compare different tools with each
other and for a preliminary assessment of
exposure.
Summary of Contents for 020058
Page 4: ...1 5 11 1 2 3 4 6 7 ...