EN
36
WARNING!
The actual vibration level when using power
tools may differ from the specified maximum
value, depending on how the tool is used.
It is therefore necessary to determine which
safety precautions are required to protect
the user, based on an estimate of exposure
in actual operating conditions (taking into
account all stages of the work cycle, e.g. the
time when the tool is switched off and when
it is idling, in addition to the start-up time).
DESCRIPTION
The product is intended for drilling, routing,
engraving, polishing, cleaning, grinding
and cutting materials such as wood, metal,
plastic, ceramic or stone. The product must
only be used in dry areas and with accessories
recommended by the manufacturer. Product
contains 50 accessories. The product is only
intended for household use.
PARTS AND ACCESSORIES
1. Chuck
2. Lock button
3. Speed control
4. Battery indicator
5. Battery (sold separately)
6. Collet chucks, 5
7. 16 cutting discs
8. Polishing discs, 3
9. Grinding discs, 4
10. Grinding bits, 5
11. HSS drills, 6
12. Mandrels as tool holder, 2
13. Routers, 3
14. Engraving bits, 2
15. Combination spanner
16. Synthetic brush
17. Synthetic brush
18. Metal brush
FIG. 1
19.
ATTACHMENT
REPLACING BIT HOLDER
1. Apply the spindle lock and keep it locked.
2. Twist the tensioning nut until the lock
engages.
3. Unscrew the tensioning nut from the
thread with the spanner.
4. Remove any accessories.
5. Insert the required accessory through the
tensioning nut and then put it in a bit
holder that fits the shank of the accessory.
6. Apply the spindle lock and keep it locked.
7. Put the bit holder in the threaded insert
and tighten the tensioning nut with the
spanner.
USE
• Do not use the product for any other
purpose than the one it is intended to be
used for. Only use accessories and spare
parts recommended by the manufacturer.
• The use of accessories or attachments
other than those recommended in these
instructions can result in a risk of personal
injury.
• Do not press too hard, this can cause the
accessory to break and/or damage the
workpiece. For best results, move the
accessory smoothly over the workpiece,
applying a slight pressure.
• Hold the product firmly with both hands
when cutting.
• The largest diameter for composite
grinding accessories, conical grinding bits
and pencil grinder bits with threaded
insert must not be more than 55 mm.
• The largest diameter for accessories for
