Meec tools 018279, Operating Instructions Manual

Page: 51 / 112

EN
47
• Only charge at room temperature.
• Only charge with the supplied charger.
• Check that the battery is dry and clean
before charging.
• Only use the type of battery supplied with
the tool.
• Recycle used batteries in accordance with
local regulations.
• A small amount of fluid can leak out of
the battery during extreme usage, or in
extreme temperatures. Follow the
instructions below if you discover fluid on
the battery.
• Carefully wipe away the fluid with a cloth.
• Avoid contact with battery fluid.
• The battery cells are of the lithium-ion
type. Do not discard batteries with
household waste, in a fire or in water.
Recycle used batteries in accordance with
local regulations.
SAFETY INSTRUCTIONS FOR
CHARGER
• The plug on the charger must match the
power point. Never modify the plug in any
way. Unmodified plugs and matching
outlets reduce the risk of electric shock.
• The charger must only be used with the
type of battery recommended by the
manufacturer. Charging other batteries
can result in an explosion, personal injury
or material damage.
• Do not charge more than two consecutive
batteries without allowing the charger to
cool.
• After charging, unplug the power cord to
the charger and remove the battery from
the charger. Do not leave batteries in the
charger.
• Never carry the product by the power
cord. Do not pull the power cord to pull
out the plug.
• Keep the power cord away from heat, oil
and sharp edges.
• Do not attempt to charge non-
rechargeable batteries.
• The power cord for the charger cannot be
replaced. Do not use the charger if the
power cord or plug are damaged.
• Do not expose the charger to rain or
moisture.
• Do not open the charger.
• Do not insert objects into the ventilation
openings on the charger.
• The charger is only intended for indoor
use.
• The battery will get hot during long
periods of use. Allow it to cool for at least
30 minutes before charging.
• The charger and battery can get hot
during the charging. This is quite normal.
• The charger should preferably be used at
room temperature.
• Do not cover the battery charger. Do not
charge the battery in direct sunlight or
near sources of heat.
• The battery must be charged when it no
longer supplies the tool with enough
power.
• Do not continue to use the tool when the
battery no longer supplies the tool with
enough power. Charge the battery
according to the instructions. The battery
can be recharged at any time, even if it is
not fully discharged.
• Make sure that the charger terminals are
not short circuited by any metal objects
when the power cord on the charger is
plugged in. Unplug the power cord when
the charger is not in use. Unplug the
power cord before cleaning.
• Never immerse the charger in water or
any other liquid.
• Never allow water to get into the charger
– risk of electric shock.