EN
33
DESCRIPTION
FIG. 1
1. Locking handle
2. Power switch [ON/OFF]
3. Speed control
4. Tool brackets
5. Ventilation openings
6. Sanding pad with accompanying
sandpaper
7. Lock washer
8. Scraper blade
9. Plunge saw blade of bi-metal
10. Dust extraction with mounting screw
NOTE:
Lock washer (7) can be prefitted on the
multi-tool.
SANDING PAD
Extremely well-suited for sanding in corners
and other areas difficult to access. Choose
a suitable sandpaper for the material to be
processed.
SCRAPER BLADE
The scraper blade is used to remove paint and
adhesive, etc.
PLUNGE SAW BLADE
Ideal for deep plunge cuts in wood, for
example, when installing ventilation grilles.
The saw blade can be used to cut nails.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Rated output
300 W
Safety class
II
Weight
1.4 kg
Oscillation frequency
11,000 – 20,000/min
Oscillation angle
3.2°
Sound pressure level, LpA
84.5 dB(A), K=3 dB(A)
Sound power level, LwA
95.5 dB(A), K=3 dB(A)
Vibration level, ah
3.611 m/s², K=1.5 m/s²
Always wear ear protection!
The declared vibration value and noise, which
have been measured by a standardised test
method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN ISO 3744, EN ISO 11201, EN ISO 5349-1,
EN ISO 5349-2.
WARNING!
The actual vibration and noise level when
using the tools may differ from the specified
maximum value, depending on how the tool
is used and the material being processed.
It is therefore necessary to determine which
safety precautions are required to protect
the user, based on an estimate of exposure
in actual operating conditions (taking into
account all stages of the work cycle, e.g. the
time when the tool is switched off and when
it is idling, in addition to the start-up time).
