EN
38
• Clean the outside of the product when
necessary with a soft, damp cloth. Do not
use solvent.
• Blow clean the product with compressed
air through the ventilation openings.
4. Lift out the blade casing from its slot.
FIG. 31
5. Remove the blade nut, the outer flange
and the old blade from the spindle.
FIG. 32
6. Put the new blade on the spindle, fitted
on the inner flange. Put the outer flange
on the spindle.
FIG. 33
NOTE:
Check that the directional arrow on the blade
corresponds with the arrow on the casing.
7. Replace the blade nut. Two spanners
are included with the product. Lock the
spindle with one spanner and tighten the
blade nut with the other one.
FIG. 34
8. Replace the blade casing in its slot and
tighten the screw.
FIG. 35
9. Replace the 45° fence.
FIG. 36
MAINTENANCE
WARNING!
Switch off the product and pull out the
plug before cleaning, maintenance and/or
replacing accessories.
NOTE:
The manufacturer cannot accept liability for
personal injury and/or material damage
resulting from unauthorised repair or
improper use.
• Keep the ventilation openings on the
product clean to prevent overheating.
Never poke anything through the
ventilation openings.
Summary of Contents for 016362
