Meec tools 010989, Operating Instructions Manual

Page: 11 / 12

EN
11
DESCRIPTION
• Measures moisture in wood and building
materials such as concrete, brick,
plasterboard and wallpaper etc.
• Also measures ambient temperature.
• Six modes for measuring different
materials.
• The lock function retains the reading for a
short time.
• The automatic power-off function saves
the battery.
• Powered by one 9 V battery (sold
separately).
1. Protective cover
2. Measuring tips
3. Moisture quotient
4. Ambient temperature
5. Detection mode
6. Mode selector button
7. Lock button for reading
8. Power switch (On/Off)
FIG. 1
USE
Inserting the battery
1. Open the battery cover on the back of the
product.
2. Connect a 9 V battery to the connector.
3. Put the battery in the battery
compartment.
4. Close the flap.
FIG. 2
STARTING AND SWITCHING OFF
Press the power switch to start and switch off
the moisture meter.
SAFETY INSTRUCTIONS
• Always take basic safety precautions
including the following when using
battery powered products to reduce the
risk of fire, battery leakage, personal
injury and/or material damage.
• Never attempt to open the battery.
• Do not store the battery where the
temperature can exceed 40°C.
• Recycle used batteries in accordance with
local regulations.
• Do not burn batteries.
• Extreme conditions can result in battery
leakage. Wipe off any fluid leaking from a
battery with a cloth, and avoid skin contact.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product in
accordance with local
regulations.
TECHNICAL DATA
Battery 9 V
Power consumption, operation 9 mA
Temperature range 0 to 40 ˚ C
Resolution 0.1%
Precision, conductivity measuring
±2%
Ambient temperature* 0 to 40 ˚ C
Ambient temperature** -10 to 50 ˚ C
Humidity max 80% RH
Automatic power-off*** Yes
Protection rating IP 20
* Operation, ** Transport and storage
*** After 2 minutes of inactivity