8
Adjustments &
connections
■
Power supply cord connection
I
nsert the enclosed DC power supply cord into the DC power input connector at the back of the monitor, then connect
to the DC 12V power supply, when using DC power supply cord.
Turn off the monitor, PC and their peripheral equipments before connecting to the PC.
• Do not operate the monitor with unspeci
fi
ed power and voltage so as not to cause
fi
re or electric shock.
• Earth the grounding wire of power supply cord. This can prevent electric shock when your equipment is
under abnormal condition. In addition, the grounding wire should never be inserted or connected to the
outlet so as not to cause
fi
re or electric shock.
• Use a power supply cord that matches the power supply voltage of the AC 100V outlet being used.
This socket-outlet shall be installed near the equipment and shall be easily accessible.
■
Connecting the cables
Fix the cables surely with each
fi
xed screws.
· Before connecting the signal cable, please turn off the power to this device, your computer and peripheral devices.
The connection of USB is recommended as for the direct connection to the computer without the USB hub etc.
Grounding lead wire
Power cord
4 Connection
RS-232C
RS-232C
Serial Port
DVI Output
Audio Output
VGA Output
2
3
4
5
6
USB
DVI-D
Audio
Computer
Mini-D-Sub
15-pin
TOUCH
(USB)
TOUCH
(RS-232C)
DVI
Input
Audio
Input
1
USB
Power cord
USB Port
1
：
DC Power cord or Power supply set
2
：
RS-232C cable (for Touch sensor communication)
3
：
USB cable (for Touch sensor communication)
4
：
D-Sub15–D-Sub15 (for Video signal)
5
：
DVI-D –DVI-D (for Video signal)
6
：
Audio Cable
（
φ
3.5-Stereo mini-jack
）
VGA
Input
Touch sensor
communication
cable is connected to
only 2 or 3.
Video signal cable is
connected
to only 4 or 5.
Summary of Contents for TSD-AT1513-CN
Page 24: ...40D871064A10 ᢏ ࡀᨭ ࡿ ᮍ᮶ ...
Page 47: ......
