SETUP (Continued):
CONNECTING TO TV OR OTHER AUDIO DEVICE
Note:
If something is plugged into both the optical and 3.5mm input jacks of
the
Connect
, the analog (3.5mm) input will have priority and the optical input
will be muted. To use the optical input, unplug the 3.5mm connector from the
transmitter.
Note:
If you have successfully connected the TOSLINK cable and you are still
not receiving any sound, please make sure that your audio output settings on
your TV, DVR, or other relevant device are set to PCM.
Option 2: RCA audio out (red and white connectors)
Older TVs usually have analog audio output with RCA (red and white)
connectors. To use the RCA output, attach the included RCA adapter to the
3.5mm stereo audio cable. Plug the connectors of the RCA adapter into the
matching-color RCA jacks on the TVs and plug the attached 3.5mm cable into
the 3.5mm input on the rear of the
Connect
.
The volume of RCA audio output is typically fixed and TV speakers can be
controlled independently of the
Connect
.
Note
: Some older TVs do not automatically output sound via RCA for certain
inputs. To enable RCA audio output, locate the audio output settings on
your TV with the options “FIXED” and “VARIABLE”, sometimes labeled “SET
MONITOR OUT”, and change this setting to “VARIABLE”. If you still don’t hear
any sound, look for a setting that controls the TV’s internal speakers and set
them to “OFF”.
continue to next page
6
